Washable Sport Mask With Velcro Strap + 2 or 5 Filters

Description

• Urban cycling
• Mountain-biking
• Running
• Horse riding
• Snowboarding
• Moto-x
• Skiing
• Speed Walking
• Climbing

It also applies to the following occasions:

• Exhaust
• Industrial emissions
• Dust allergies
• PM2.5

In order for any mask to perform to its maximum capacity, it must be able to seal properly around the nose and mouth so that as much of the air that is being inhaled, is actually passing through the filter. If it is not passing through the filter, then, no matter how effective the filter is, the user will still be inhaling unfiltered air.

All our masks are made from soft texture materials. Being resiliently stretchable it allows the masks to conform easily to varying facial features, sealing around the face, thus a good seal and a comfortable fit.

Fitting instructions

1. With nosepiece facing away from you. Hold the earloop strap in each hand with the nosepiece up.
2. Position the respirator under the chin
3. Pull each strap over the ear. Adjust the straps as comfortable as possible.
4. Place the fingertips of both hands at the tops of the nosepiece. Mold the nosepiece to the shape of the nose bridge by pushing inwards while moving your finger tips down both sides of the nosepiece. Pinching the respirator nosepiece using only one hand may result in less effective respirator fit.

It is very important to press the nosepiece firmly to the nose bridge form a good seal.

The replacement time of filter and valves

The effective working life of the masks filters depends on a number of factors, such as the breathing rate of the user, ambient levels of pollution(Australia is not highly polluted); the length of time the filter is actively working; hygiene levels.

The valves should need replacing on a regular basis assuming that they are maintained properly. On the valve, it is essential that you locate the two pins, nearest the hinge, properly into the body of the valve, and check that they are seated properly.